Belkin Omniview SMB KVM-over-IP Switch F1DP108G Manuel d'utilisateur télécharger pdf (Page 40)

section

Remote Installation

Tospecifyandnameservers:

1. Click next to the Daisy-Chain field and select the KVM-switch

configuration that best suits your configuration.

2. Click . The number of possible connected servers will appear in the

Server Name section.

3. Change the name of each connected server by highlighting the server and

typing in a new name.

4. Click . to save the changes.

Note: You will need to change the name of every server you want to access.

Server names left as “UNUSED” cannot be accessed.

InstallingnewSwitch-DefinitionFiles(SDFs)

If your switch-configuration type is not listed in the Daisy-Chain drop-down list,

contact Belkin Technical Support at (800) 282-2355 to request an updated SDF

with the desired KVM-configuration list.

To install the SDF:

Load the file onto the client computer.

2. Click to locate the new SDF.

3. Click “Install” to update the Switch with the new file.

Note: If you change the hot-key sequence in the local OSD to

“Print Screen”, “Ctrl”, or “F12”, you must load a new switch-definition

file (SDF) for the corresponding hot key. The SDF can be downloaded from

www.belkin.com/support.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 83 84

Pas de commentaire

Belkin Omniview SMB KVM-over-IP Switch F1DP108G Manuel d'utilisateur Page 40