Belkin Omniview SMB KVM-over-IP Switch F1DP108G Manuel d'utilisateur télécharger pdf (Page 15)

Local Installation

Cable-DistanceRequirements(forPS/2,USB,andSunServers)

VGA signals transmit best up to 100 feet (30m). Beyond that length, the

probability of video degradation increases. For this reason, Belkin recommends

that the length of the CAT5 UTP cable between the Switch and the connected

servers does not exceed 100 feet (30m).

Note: The Belkin CAT5 Extender (F1D084) may be used to extend your console

(keyboard, mouse, and monitor) by up to 300 feet (91m).

Warning: Avoid placing cables near fluorescent lights, air-conditioning

equipment, or machines that create electrical noise (e.g., vacuum cleaners).

You are now ready to begin installation of your Switch. The following

sections (pages 13–22) provide complete instructions for the hardware

setup of a single Switch (F1DP108G, F1DP116G).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 83 84

Pas de commentaire

Belkin Omniview SMB KVM-over-IP Switch F1DP108G Manuel d'utilisateur Page 15