Belkin OmniView Quad-Bus Server Interface Module, USB Sun Manuel d'utilisateur Page 8

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 52
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 7
8 Installing your Server Interface Module
Step 5 Connect the Quad-Bus KVM-over-IP or CAT5 KVM Switch to the
Server Interface Module using the included Belkin CAT5e Patch Cable
or other CAT5 cable.
Step 6 Repeat steps 2 through 5 for each additional USB Sun server
you wish to connect.
Step 7 Power up all connected servers.
Step 8 Power up your Quad-Bus KVM-over-IP or CAT5 KVM Switch.
You are now ready to use your OmniView Quad-Bus Server Interface Module.
If you have any problems during installation, please refer to the OmniView
Quad-Bus KVM-over-IP or CAT5 KVM Switch User Manual.
Server
Note:
Your server should recognize your Server Interface Module and automatically
install the HID USB driver if necessary.
P74936_F1DW101AeaAS_QIG.indb 8 9/1/07 5:41:06 pm
Vue de la page 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 51 52

Commentaires sur ces manuels

Pas de commentaire