Belkin Next Net Series Manuel d'utilisateur télécharger pdf (Page 22)

USING THE WEB-BASED ADVANCED USER INTERFACE

Changing LAN Settings

All settings for the internal LAN setup of the Router can be viewed and

changed here.

1. IP Address

The “IP address” is the internal IP address of the Router. The default IP address

is “192.168.2.1”. To access the advanced setup interface, type this IP address

into the address bar of your browser. This address can be changed if needed. To

change the IP address, type in the new IP address and click “Apply Changes”. The

IP address you choose should be a non-routable IP. Examples of a non-routable

IP are:

192.168.x.x (where x is anything between 0 and 255)

10.x.x.x (where x is anything between 0 and 255)

2. Subnet Mask

There is no need to change the subnet mask. This is a unique, advanced feature

of your Belkin Router. It is possible to change the subnet mask if necessary,

however, do NOT make changes to the subnet mask unless you have a specific

reason to do so. The default setting is “255.255.255.0”.

(1)

(2)

(3)

(4)

(5)

(6)

4040

USING THE WEB-BASED ADVANCED USER INTERFACE

Using your Internet browser, you can access the Router’s Web-Based Advanced

User Interface. In your browser, type “192.168.2.1” (do not type in anything else

such as “http://” or “www”) then press the “Enter” key.

You will see the Router’s home page in your browser window.

Viewing the LAN Settings

Clicking on the header of the LAN tab (A) will take you to the LAN tab’s header

page. A quick description of the functions can be found here. To view the

settings or make changes to any of the LAN settings, click on “LAN Settings” (B)

or to view the list of connected computers, click on “DHCP Client List” (C).

(A)

(B)

(C)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 43 44

Pas de commentaire

Belkin Next Net Series Manuel d'utilisateur Page 22