Belkin ADSL Modem with Wireless 802.11g Router Manuel d'utilisateur télécharger pdf (Page 42)

4140

Manually Configuring your Router

Setting WPA-PSK (no server)

From the “Security Mode” drop-down menu, select “WPA-PSK

(no server)”.

2. Enter your pre-shared key. This can be from eight to 40

characters and can be letters, numbers, or symbols. This same

key must be used on all of the clients that you set up.

3. Click “Apply Changes” to finish. You must now set all clients to

match these settings.

Setting WPA (with server) Settings

If your network uses a radius server to distribute keys to the clients,

use this setting.

1. From the “Security Mode” drop-down menu, select “WPA

(with server)”.

2. Enter the IP address of the radius server into the “Radius

Server” fields.

3. Enter the radius key into the “Radius Key” field.

4. Enter the key interval. Key interval is how often the keys are

distributed (in packets).

5. Click “Apply Changes” to finish. You must now set all clients to

match these settings.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 88 89

Pas de commentaire

Belkin ADSL Modem with Wireless 802.11g Router Manuel d'utilisateur Page 42