Belkin Wireless Pre-N Router F5D8230-4 Manuel d'utilisateur télécharger pdf (Page 56)

Using the Web-Based Advanced User Interface

Using the Access Point Mode

Note:

This advanced feature should be employed by advanced

users only. The Router can be configured to work as a wireless

network Access Point. Using this mode will defeat the NAT IP sharing

feature and DHCP server. In AP mode, the Router will need to be

configured with an IP address that is in the same subnet as the

rest of the network that you will bridge to. The default IP address

is 192.168.2.254 and subnet mask is 255.255.255.0. These can be

customized for your need.

Enable the AP mode my selecting “Enable” in the “Use as Access

Point only” page. When you select this option, you will be able to

change the IP settings.

Set your IP settings to match your network. Click “Apply Changes”.

Connect a cable from the WAN port on the Router to your

existing network.

The Router is now acting as an Access Point. To access the Router

advanced user interface again, type the IP address you specified into

your browser’s navigation bar. You can set the encryption settings,

MAC address filtering, SSID, and channel normally.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 118 119

Pas de commentaire

Belkin Wireless Pre-N Router F5D8230-4 Manuel d'utilisateur Page 56