Belkin USB Ethernet Adapter F5U011 Manuel d'utilisateur télécharger pdf (Page 11)

5. UNINSTALLING PROCEDURES

If you wish to remove the Belkin USB Ethernet Adapter component from your

computer, do the following:

1. Disconnect the USB cable from the adapter.

2. Select My Computer / Control Panel / Add/Remove Programs.

3. In the Install/Uninstall tab, select USB Ethernet Adapter.

4. Click Add/Remove.

5. Click Yes.

The software program will be automatically removed by Windows

6. TROUBLESHOOTING

If you encounter difficulties when installing or using the Belkin USB Ethernet

Adapter, use the following table to troubleshoot the problem.

PROBLEM SUGGESTED SOLUTION / COMMENTS

You cannot find the other computer (on the

Ethernet side of the network connection).

When reconnecting the USB device, the

system seems to take a long time.

The system installation appears to be slow.

The Ethernet Adapter does not work when

connected through a bus-powered USB hub.

Use the Windows

Find Computer option.

Be patient when reconnecting a USB device.

Wait at least 20 seconds between disconnecting

and connecting devices.

Be patient when Windows

is installing the

Adapter (or any other USB device). Plug and

Play operations in Windows

can sometimes

take up to 30 seconds or so between apparent

activities.

The Belkin USB Ethernet Adapter is a (USB)

bus-powered product. Current versions are

considered high power devices (that is, they

consume more than 100 mA when in operating

mode). Thus, they cannot be used downstream

of bus-powered hubs, which deliver only 100

mA per port. The adapter will enumerate

correctly, but the operating system will not

allow it to come up to full power.

1 2 ... 6 7 8 9 10 11 12 13 14

Pas de commentaire

Belkin USB Ethernet Adapter F5U011 Manuel d'utilisateur Page 11