Belkin F5D8233-4 Manuel d'utilisateur télécharger pdf (Page 77)

Set up the computer that is connected to the cable or DSL modem

FIRST using these steps. You can also use these steps to add

computers to your Router after the Router has been set up to connect

to the Internet.

Manually Configuring Network Settings in Mac OS up to 9.x

Pull down the Apple menu. Select “Control Panels” and

select “TCP/IP”.

You will see the TCP/IP control panel. Select “Ethernet Built-In”

or “Ethernet” in the “Connect via:” drop-down menu

(1)

Next to “Configure”

(2)

if “Manually” is selected,

your Router will need to

be set up for a static IP

connection type. Write

the address information

in the table below.

You will need to enter

this information into

the Router.

If not already set, at “Configure:”, choose “Using DHCP Server”.

This will tell the

computer to obtain an IP address from the Router.

Close the window. If you made any

changes, the following window will

appear. Click “Save”.

Restart the computer. When the computer restarts, your

network settings are now configured for use with the Router.

(1)

(2)

Manually Configuring Network Settings

section

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 103 104

Pas de commentaire

Belkin F5D8233-4 Manuel d'utilisateur Page 77