Belkin F4D116 Manuel d'utilisateur télécharger pdf

INSTRUCTION SHEET- F4D116

ALUMINUM EQUIPMENT RACK 19" X 48"

INSTRUCTIONS

1. Lay side rails (1) on the floor.

2. Assemble base angle (2), and top

angle (3) as shown in Figure 1.

3. Turn rack over and repeat base and

top angles on other side.

4. Square legs. Tighten all bolts.

5. Mount to floor, using suitable

fasteners (see note below).

6. Install equipment using provided

screws.

NOTE:

-Due to variances in floors, shims may

be needed under base angles.

-To square legs, measure diagonally

between top and bottom bolts. The

distance between A and B should be the

same as C and D (see Figure 2).

FIGURE!

BELKIN

TOOLS NEEDED:

9/16" wrench or socket

Measuring tape

#2 Phillips screwdriver

Parts List

ITEM QTY DESCRIPTION

1 2 Rack Leg

2 2 Rack Base

Top Angle

4 12

Flat Washer 3/8"

5 12 Hex Cap Screw 3/8-16 x 1

6 30 Pan Head Phillips 12-24 x 0.625

INSTRUCTION SHEET- F4D116ALUMINUM EQUIPMENT RACK 19" X 48"INSTRUCTIONS1. Lay side rails (1) on the floor.2. Assemble base angle (2), and top

Pas de commentaire

Belkin F4D116 Manuel d'utilisateur