Belkin F1DJ102P-B Fiche technique télécharger pdf

This sheet will guide you through the basic steps needed to install the

2-Port KVM Switch (the Switch). If you have any problems during

installation, please refer to the User Manual.

Introduction

Connecting the Keyboard, Video, and Mouse to the Console Ports on the Switch

Connecting Computers to the Switch

1. Power down all computers.

2. Connect your PS/2-type keyboard and mouse to the KEYBOARD and

MOUSE ports located on the side panels of your Switch.

3. Take the video cable that is attached to your monitor and connect it to the

VGA OUT port located on the side of the Switch.

1. Using an OmniView KVM Cable kit,

take the VGA cable and connect the

male end of the cable to the VGA

port on the first computer. Connect

the female end to the VGA 1 port

on the side of the Switch.

2. Connect one end of the PS/2 keyboard

KVM cable to the keyboard port on

the computer and the other end to the

KEYBOARD 1 port on the side of

the Switch.

You will need the following items to install the 2-Port KVM Switch:

• KVM Switch

• One (each) keyboard, monitor, and mouse

• One KVM cable kit per computer installed (included)

Recommended Cable Kit:

F1D9000-XX PS/2 Style

(-XX denotes the length in 6, 10, 15, and 25 feet)

1 2

Introduction 1
2-Port KVM Switch 2

Résumé du contenu

Page 1 - Introduction

This sheet will guide you through the basic steps needed to install the2-Port KVM Switch (the Switch). If you have any problems duringinstallation, pl

Page 2 - 2-Port KVM Switch

You are now ready to use your Switch.Please refer to your User Manual for additional information.Connecting Computers to the KVM Switch 23. Connect on