Belkin F5D8235-4 Manuel d'utilisateur télécharger pdf (Page 75)

N+ Wireless Router

SECTIONSTable of Contents 1 2 3 4 5 6 7 8 10

TROUBLESHOOTING

Troubleshooting

Setup Assistant CD does not automatically start.

If the CD-ROM does not start the Setup Assistant automatically, it could

be that the computer is running other applications that are interfering

with the CD drive.

1. If the Setup Assistant Welcome screen does not appear within

15-20 seconds, open up your CD-ROM drive by double-clicking on

the “My Computer” icon that is located on your desktop.

2. Next, double-click on the CD-ROM drive that the Setup Assistant

CD has been placed in to start the installation.

3. The Setup Assistant should start within a few seconds. If, instead,

a window appears showing the files on the CD, double-click on the

icon labeled “SetupAssistant”.

4. If the Setup Assistant still does not start, reference the section

titled “Manually Configuring Network Settings” (page 67) of this

User Manual for an alternative setup method).

Setup Assistant cannot find my Router.

If the Setup Assistant is not able to find the Router during the installation

process, please check the following items:

1. If the Setup Assistant is not able to find the Router during the

installation process, there may be third-party firewall software

installed on the computer attempting to access the Internet.

Examples of third-party firewall software are ZoneAlarm, BlackICE

PC Protection, McAfee Personal Firewall, and Norton Personal

Firewall. If you do have firewall software installed on your

computer, please make sure that you properly configure it. You can

determine if the firewall software is preventing Internet access by

temporarily turning it off. If, while the firewall is disabled, Internet

access works properly, you will need to change the firewall settings

to function properly when it is turned on. Please refer to the

instructions provided by the publisher of your firewall software for

instructions on configuring the firewall to allow Internet access.

2. Unplug power to the Router for 10 seconds, and then plug the

power back into the Router. Ensure that the Router’s “router” LED

is on; it should be solid BLUE. If not, check to make sure that the

AC adapter is connected to the Router and plugged into a wall

outlet.

3. Ensure that you have a cable connected between the network

(Ethernet) port on the back of the computer and one of the “to

Wired Computers” ports on the back of the Router.

Note: The computer should NOT be connected to the port labeled “to

Modem” on the back of the Router.

4. Try shutting down and restarting your computer, then rerunning the

Setup Assistant.

If the Setup Assistant is still unable to find the Router, reference the

section titled “Manually Configuring Network Settings” for installation

steps.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 88 89

Commentaires sur ces manuels

Pas de commentaire

Belkin F5D8235-4 Manuel d'utilisateur Page 75

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Belkin F5D8235-4