Belkin F8Z109 Manuel d'utilisateur télécharger pdf (Page 29)

TROUBLESHOOTING

Most problems with your TuneStudio can be solved quickly by following the advice in this chapter.

If you continue to have trouble, contact Belkin Customer Service at 800-223-5546 ext. 2263 or on the

web at http://www.belkin.com/support.

If the Recording Menu button doesn’t work:

•

This button works with iPod 5th generation (video) and iPod nano 2nd generation. It does not work with

the iPod classic or iPod nano 3rd generation (video).

•

If you are using the iPod classic or iPod nano 3rd generation (video), simply navigate to the “Voice Memo”

menu on the iPod itself.

If your TuneStudio won’t turn on:

•

Make sure you’re using the supplied 12V 1.25A power adapter.

•

Try using another power outlet.

If you don’t hear anything in the studio monitors or headphones:

•

Make sure your TuneStudio is plugged in and turned on.

•

Make sure the cables are securely connected.

•

Verify your source is playing.

•

Turn up the level control(s).

If these suggestions don’t help, you might have a bad cable. Check all of your cables and try replacing them

with known good ones.

If the microphone volume is too low:

•

Make sure the cables are securely connected.

•

If you are using a condenser mic, try turning on phantom power.

•

If the microphone is connected to channel 1 or 2, turn up the gain control.

If an instrument’s volume is too low:

•

Make sure the cables are securely connected.

•

Turn up the instrument’s volume. If the volume is still too low, check the instrument by connecting your

headphones to the instrument.

•

Adjust the channel’s level control.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 107 108

Pas de commentaire

Belkin F8Z109 Manuel d'utilisateur Page 29